GB/T13852-1992 船用液壓控制閥技術條件 General specification of hydraulic control valves for ship
GB/T17490-1998 液壓控制閥油口、底板、控制裝置和電磁鐵的標識 Hydraulic fluid power--Identification of valve ports,subplates,control devices and solenoids
GB/T15623.1-2003 液壓傳動 電調制液壓控制閥 第1部分：四通方向流量控制閥試驗方法 Hydraulic fluid power-Electrically modulated hydraulic control valves-Part 1:Test methods for four-way directional flow control valves
GB/T15623.2-2003 液壓傳動 電調制液壓控制閥 第2部分：三通方向流量控制閥試驗方法 Hydraulic fluid power-Electrically modulated hydraulic control valves-Part 2:Test methods for three-way directional flow control valves
GB/T17213.7-1998 工業過程控制閥第7部分: 控制閥數據單 Industrial-process control valves Part 7: Control valve data sheet
GB/T17213.8-1998 工業過程控制閥第8部分: 噪聲的考慮第1節: 實驗室內測量空氣動力流流徑控制閥產生的噪聲 Industrial-process control valves Part 8: Noise considerations Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves
GB/T17213.1-1998 工業過程控制閥第1部分: 控制閥術語和總則 Industrial--Process control valves Part 1: Control valve terminology and general considerations
GB/T17213.5-1998 工業過程控制閥第5部分: 標志 Industrial-process control valves Part 5: Marking
GB/T2514-1993 四油口板式液壓方向控制閥安裝面 Hydraulic fluid power--Four-port directional control valves--Mounting surfaces
GB/T8104-1987 流量控制閥試驗方法 Hydraulic fluid power--Valves--Testing method of flow control valves
GB/T7940.3-2001 氣動五氣口方向控制閥第三部分: 功能識別編碼體系 Pneumatic fluid power--Five-port directional control valves--Part 3: Code system for communication of valve functions
GB/T8106-1987 方向控制閥試驗方法 Hydraulic fluid power--Valves--Testing method of directional control valves
GB/T7940.2-2001 氣動五氣口方向控制閥第二部分帶電氣接頭的安裝面 Pneumatic fluid power--Five-port directional control valves--Part 2: Mounting interface surfaces with optional elettrical connector
GB/T8105-1987 壓力控制閥試驗方法 Hydraulic fluid power--Valves--Testing method of pressure control valves
GB/T7940.1-2001 氣動五氣口方向控制閥第一部分: 不帶電氣接頭的安裝面 Pneumatic fluid power--Five-port directional control valves--Part 1: Mounting interface surfaces without electrical connector
NF C46-520-1993 工業過程控制閥.第8部分:噪聲問題.第2節:通過控制閥的液壓流動產生的噪聲的實驗室測量 (Industrial-process control valves. Part 8 : noise considerations. Section 2 : laboratory measurement of noise generated by hydrodynamic flow through control valves.)
NF C46-522-1994 工業處理控制閥.第8部分:噪聲條款.第4節:液壓流動產生的噪聲預定(EN 534-8-4) (Industrial-process control valves. Part 8 : noise considerations. Section 4 : prediction of noise generated by hydrodynamic flow.)
NF E49-080-1-2002 氣壓液動.五通定向控制閥.第1部分:不帶電連接器的安裝接口 (Pneumatic fluid power - Five-port directional control valves - Part 1 : mounting interfaces without electrical connector.)
NF E49-080-2-2002 氣壓液動.五通方向控制閥.第2部分:任選電氣連接器的安裝接口面 (Pneumatic fluid power - Five-port directional control valves - Part 2 : mounting interface surfaces with optional electrical connector.)
NF C46-505-1998 絕緣過程控制閥.第2-3部分:流量容量.試驗過程 (Industrial-process control valves. Part 2-3 : flow capacity. Test procedures.)
NF C46-630-1998 工業過程控制閥.第6部分:控制閥與定位器連接用安裝細節.第1節:線性傳動裝置上安裝的定位器 (Industrial-process control valves. Part 6 : mounting details for attachment of positioners to control valves. Section 1 : positioner mounting on linear actuators.)
NF E29-453-2000 工業過程控制閥門 (Industrial process control valves.)
NF E29-316-5-2001 供水用閥門.適用性要求和專用檢查試驗.第5部分:控制閥門 (Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5 : control valves.)
NF C46-521-2001 工業過程控制閥.第8部分:噪聲問題.第3節:氣動控制閥噪聲預測法 (Industrial-process control valves - Part 8-3 : noise considerations - Control valves aerodynamic noise prediction method.)
NF E48-435-1998 液壓傳動.尺寸02、03和05的四端口模式排氣閥和四端口方向控制閥.夾緊尺寸 (Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05. Clamping dimensions.)
NF C46-519-2001 工業過程控制閥.第8部分:噪聲考慮.第1節:實驗室測量氣動流經控制閥產生的噪聲 (Industrial-process control valves - Part 8 : noise considerations - Section 1 : laboratory measurement of noise generated by aerodynamic flow through control valves.)
NF C46-531-2001 工業過程控制閥.第6-2部分:定位器裝到控制閥的安裝細則.旋轉傳動裝置上安裝的定位器 (Industrial-process control valves - Part 6-2 : mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators.)
NF E49-091-2002 氣壓傳動.控制閥和其它部件的孔口和控制機械的驗證 (Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components.)
XP E29-140-1999 使用氣體燃料的家用裝置的控制閥.安全控制閥(帶有集中自動密閉器的) (Control cocks for household appliances using gaseous fuels - Safety cocks (with integrated automatic obturator).)
NF C46-510-2001 工業過程控制閥.第3-1部分:尺寸.雙通球型直立式控制法蘭閥門的面對面尺寸和雙通球型角度控制法蘭閥門的中心 (Industrial-process control valves - Part 3-1 : dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, a)
NF C46-511-2001 工業過程控制閥.第3-2部分:尺寸.蝶閥除外的旋轉控制閥門的面對面尺寸 (Industrial-process control valves - Part 3-2 : dimensions - Face-to-face dimensions for rotary control valves except butterfly valves.)
NF E49-090-2-2003 氣壓傳動.18mm和26mm五氣口方向控制閥.第2部分:帶光學電接頭的安裝面 (Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 2 : mounting interfaces with optional electrical connector.)
NF C46-512-1999 工業處理控制閥.第3-3部分:尺寸.對焊接的頭尾相接尺寸.兩接頭球型直接式控制閥(歐洲標準EN 60534-3-3) (Industrial-process control valves. Part 3-3 : dimensions. End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves.)
ANSI/IEEE 1290-1996 核發電站電動控制閥門馬達應用、防護、控制和試驗指南 (Guide for MOV (Motor-Operated Valve) Motor Application, Protection, Control, and Testing in Nuclear Power Generating Stations)
ANSI/FCI 87-2-1990 彈簧模板驅動控制閥動力信號標準 (Power Signal Standard for Spring-Diaphragm Actuated Control Valves)
ANSI/ISA 75.08.02-2003 無凸緣的控制閥端面間的尺寸(級別150、300和600) (Face-to-Face Dimensions for Flangeless Control Valves (Classes 150, 300, and 600) )
ANSI/ISA S 75.08.03-2001 承插焊接端頭和螺旋端頭球狀控制閥的面到面尺寸 (Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500))
ANSI/ISA 75.08.06-2002 帶凸緣的球型控制閥體的面對面尺寸(類型900、1500和2500) (Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and 2500) )
ANSI/ISA 75.08.05-2002 端頭對焊球型控制閥的面對面尺寸(類型150、300、600、900、1500和2500) (Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500) )
ANSI/ISA 75.01.01-2002 尺寸控制閥用流量方程式 (Flow Equations for Sizing Control Valves )
ANSI/ISA 75.08.01-2002 整體式帶凸緣的球型控制閥體的面對面尺寸(類型125、150、250、300和600) (Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125, 150, 250, 300, and 600) )
ANSI/ISA S 75.19.01-2001 控制閥的靜水試驗 (Hydrostatic Testing of Control Valves)
ANSI/ISA S 75.08.04-2001 對焊端頭球狀控制閥的面到面尺寸 (Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves)
ANSI/ISA S 75.08.07-2001 獨立法蘭球狀控制閥的面到面尺寸 (Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and 600))
ANSI/(NFPA) T 3.5.14 R1-1997 液力傳動.直接控制閥門.分界特性的測定方法 (Hydraulic Fluid Power - Directional Control Valve - Method for Determining the Metering Characteristics)
ANSI/(NFPA) T 3.21.8-1990 氣壓液動.反應時間的測量.直接控制閥門 (Pneumatic Fluid Power - Measurement of Response Time - Directional Control Valves)
ANSI/ISA S 75.15-1993 對焊端球狀控制閥的面對面尺寸(ANSI等級150、300、600、900、1500、2500) (Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500))
ANSI/FCI 91-1-1997 控制閥門密封的質量標準 (Standard for Qualification of Control Valve Stem Seals)
ANSI/UL 753-1996 消防裝置用自動供水控制閥的警報附件 (Alarm Accessories for Automatic Water-Supply Control Valves for Fire-Protection Service)
BS EN 60534-2-5-2003 工業過程控制閥.流通能力.通過有段間恢復功能的多段控制閥的流體流量的校準公式 (Industrial-process control valves - Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery)
ASTM F 1985-1999 氣力操作的球形控制閥標準規范 (Standard Specification for Pneumatic-Operated, Globe-Syle, Control Valves)
BS EN 60534-3-2-2001 工業過程控制閥.尺寸.蝶形閥除外的轉式控制閥的端面距 (Industrial-process control valves - Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves)
BS ISO 15407-2-2003 氣壓傳動.五氣口方向控制閥,規格18mm和26mm.有任選電接頭的安裝接口 (Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces with optional electrical connector)
BS ISO 12238-2001 氣壓液動.方向控制閥門.轉換時間的測量 (Pneumatic fluid power - Directional control valves - Measurement of shifting time)
BS ISO 5599-1-2001 氣壓液動.五通方向控制閥.不帶電連接器的安裝接口表面 (Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces without electrical connector)
BS ISO 5599-2-2001 氣壓液動.五通方向控制閥.任選電氣連接器的安裝接口面 (Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces with optional electrical connector)
BS EN 60534-6-2-2001 工業過程控制閥.定位器裝到控制閥的安裝細則.旋轉傳動裝置上安裝的定位器 (Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators)
BS EN 1074-5-2001 供水閥門.適用性和專用要求的試驗.控制閥門 (Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Control valves)
BS EN 60534-8-3-2000 工業流程控制閥.噪聲問題.控制閥的空氣動力噪聲預報法 (Industrial-process control valves - Noise considerations - Control valve aerodynamic noise prediction method)
BS EN 60534-2-3-1998 工業過程控制閥.流量.試驗程序 (Industrial-process control valves - Flow capacity - Test procedures)
BS EN 60534-8-1-2001 工業過程控制閥.噪聲問題.通過控制閥的動力噪聲的實驗室測量 (Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves)
BS EN 60534-3-1-2000 工業過程控制閥.尺寸.帶法蘭的兩路、球型、直立式控制閥門的面對面尺寸和帶法蘭的兩路、球型、角度控制閥門 (Industrial-process control valves - Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle patter)
BS EN 1349-2000 工業處理控制閥門 (Industrial process control valves)
BS ISO 15407-1-2000 18mm和26mm五氣口氣動方向控制閥.無電插頭的安裝界面 (Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces without electrical connector)
BS ISO 11727-1999 氣動流體力學.控制閥和其它元件的控制機械裝置和氣門的識別 (Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components)
BS EN 60534-3-3-1998 工業過程控制閥.尺寸.對接焊接,兩向,球型,垂直模式控制閥的末端對末端尺寸 (Industrial-process control valves - Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves)
BS EN 60534-2-1-1999 工業過程控制閥 .流容.安裝條件下液流規模方程 (Industrial-process control valves - Flow capacity - Flow capacity - Sizing equations for fluid flow under installed conditions)
BS ISO 6263-1997 液壓傳動.補償式流量控制閥.裝配面 (Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces)
BS ISO 10770-2-1998 液壓傳動.電模式液壓控制閥.第2部分:三向流動控制閥的試驗方法 (Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for three-way directional flow control valves)
BS ISO 10770-1-1998 液壓傳動.電模式液壓控制閥.第1部分:四向流動控制閥的試驗方法 (Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for four-way directional flow control valves)
BS EN 60534-6-1-1998 工業過程控制閥 .控制閥調節器連接用安裝元件.直線傳動裝置上調節器的安裝 (Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on linear actuators)
BS ISO 7790-1998 液壓傳動.規格為03和05型的四油口標準設計疊閥和四油口定向控制閥.緊固尺寸 (Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions)
EN 60534-8-1-2000 工業過程控制閥第8部分：噪聲的考慮第1節：氣動流流徑控制閥產生的噪聲的實驗室測量 Industrial-process control valves - Part 8: Noise consideration; Section 1: Laboratory measurement of noise generated by hydrodynamic aerodynamic flow through control valves (IEC 60534-8-1:1986)
EN 60534-8-4-1994 工業過程控制閥第8部分：噪聲問題第4節：流動產生的噪聲的預測 Industrial-process control valves - Part 8: Noise considerations - Section 4: Prediction of noise generated by hydrodynamic flow (IEC 60534-8-4:1994)
EN 60534-8-3-2000 工業流程控制閥.第8-3部分噪聲問題通過控制閥的動力噪聲預測法 Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method (IEC 60534-8-3:2000)
EN 1074-5-2001 供水閥門 目的要求的適應性和合適的認證試驗 第5部分：控制閥門 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves
EN 60534-3-1-2000 工業過程控制閥第３－１部分：尺寸法蘭雙通球形直型控制閥的端面間距尺寸和有法蘭雙通球型角型控制閥的 Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (IEC 60534-3-1:2000)
EN 60534-2-1-1998 工業過程控制閥第2－1部分：流通能力安裝條件下流體流量的校準公式 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions (IEC 60534-2-1:1998)
EN 60534-1-1993 工業過程控制閥第1部分控制閥術語和一般考慮 Industrial-process control valves - Part 1: Control valve terminology and general considerations (IEC 60534-1:1987)
EN 60534-3-2-2001 工業過程控制閥第３部分：尺寸第２節：無法蘭控制閥（薄型蝶閥除外）的端面間距尺寸 Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves (IEC 60534-3-2:2001)
EN 60534-3-3-1998 工業過程控制閥第三部分：尺寸對接焊接兩向球型垂直模式控制閥的末端對末端尺寸 Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves (IEC 60534-3-3:1998)
EN 60534-6-1-1997 工業過程控制閥第6－1部分：定位器聯到控制閥執行機構的安裝細則第1節：直線傳動裝置上調節器的安裝 Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators (IEC 60534-6-1:1997)
EN 60534-6-2-2001 工業過程控制閥第6－2部分：定位器聯到控制閥執行機構的安裝細則環形執行機構定位器 Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves; Positioner mounting on rotary actuators (IEC 60534-6-2:2000)
EN 60534-8-2-1993 工業過程控制閥第8部分噪聲考慮第2節通過控制閥的流體產生的噪聲的實驗室測量報法 Industrial-process control valves- Part 8: noise consideration- Section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves (IEC 60534-8-2:1991)
EN 60534-2-3-1998 工業過程控制閥第２部分：流通能力第３節：試驗規程 Industrial-process control valves - Part 2-3: Flow capacity - Test procedures (IEC 60534-2-3:1997)
prEN 13959-2000 公稱壓力在DN6至DN250（含DN250）的防污染控制閥E族A、B、C和D型 Anti-pollution check valves DN 6 to DN 250 inclusive - Family E, type A, B, C and D
prEN 60534-4-1998 工業過程控制閥第４部分：檢驗和常規試驗草案 IEC 60534-4: Industrial-process control valves - Part 4: Inspection and routine testing
EN 1349-2000+AC-2001 工業加工控制閥門 Industrial process control valves
EN 60534-2-5-2003 工業加工控制閥第2-5部分：流量 通過帶級間恢復多級控制閥的流體尺寸方程 Industrial-process control valves - Part 2-5: Flow capacity; Sizing equations for fluid flow through multistage control valves with interstage recovery (IEC 60534-2-5:2003) / Note: Endorsement notice
BS ISO 4401-1996 液壓傳動.四油口定向控制閥.裝配面 (Hydraulic fluid power - Four-port directional control valves - Mounting surfaces)
BS EN 60534-1-1989 工業過程控制閥 .第1部分:控制閥術語和一般考慮 (Industrial-process control valves - Industrial-process control valves - Control valve terminology and general considerations)
BS EN 60534-8-4-1994 工業過程控制閥.第8部分:噪聲問題.第4節.流動產生的噪聲的預報 (Industrial-process control valves - Noise considerations - Prediction of noise generated by hydrodynamic flow)
BS EN 60534-8-2-1991 工業過程控制閥.第8部分:噪聲考慮.第2節:通過控制閥的流體產生的噪聲的實驗室測量 (Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves)
BS 6494-4-1989 液壓閥的安裝面.第4部分:03和05規格的四孔組件排氣閥、模數組閥和方向控制閥夾緊尺寸規范 (Hydraulic fluid power valve mounting surfaces - Specification for clamping dimensions of four-part, size 03 and 05, modular stack valves and directional control valves)
BS 5793-4-1987 工業過程控制閥.第4部分:檢驗和例行試驗規范 (Industrial-process control valves - Specification for inspection and routine testing)
BS 5944-4-1984 液壓動力系統和部件所產生的空氣噪音的測量.第4部分:流量和壓力控制閥聲功率級的測定方法 (Measurement of airborne noise from hydraulic fluid power systems and components - Method of determining sound power levels from valves controlling flow and pressure)
BS 5793-5-1984 工業過程控制閥.第5部分:標記規范 (Industrial-process control valves - Specification for marking)
BS 1655-1950 過程控制工業用法蘭連接自動控制閥(面至面尺寸)規范 (Specification for flanged automatic control valves for the process control industry (face-to-face dimensions))
DIN EN 60534-2-3-1998 工業過程控制閥.第2-3部分:流量.檢驗方法 (Industrial-process control valves - Part 2-3: Flow capacity; test procedures (IEC 60534-2-3:1997); German version EN 60534-2-3:1998)
DIN EN 60534-6-1-1998 工業流程控制閥.第6部分:調節閥門驅動的位置調節器固定用安裝細節.第1節:行程驅動上位置調節器的安裝 (Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Postioner mounting on linear actuators (IEC 60534-6-1:1997); German version EN 60534-6-1:1997)
DIN EN 60534-1-1995 工業過程控制閥.第1部分:控制閥術語和一般原理 (Industrial-process control valves - Part 1: Control valve terminology and general considerations (IEC 60534-1:1987); German version EN 60534-1:1993)
DIN IEC 60534-7-1992 工業過程控制閥.第7部分:.數據表 (Industrial process control valves; control valve data sheet; identical with IEC 60534-7:1989)
DIN IEC 60534-2-4-1990 工業過程控制閥.第2部分:流通能力.第4節:內在的流動特性線和調節比例關系 (Industrial-process control valves; flow capacity; inherent flow characteristics and rangeability; identical with IEC 60534-2-4:1989)
DIN EN 60534-8-2-1994 工業過程控制閥.第8部分:噪聲問題.第2節:由通過控制閥的液力流產生的噪聲的實驗室測量 (Industrial-process control valves; part 8: noise considerations; section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves (IEC 60534-8-2:1991); German version EN 60534-8-2:1993)
DIN EN 60534-8-4-1995 工業過程控制閥.第8部分:噪聲狀態.第4節.流動產生的噪聲的預報 (Industrial-process control valves - Part 8: Noise considerations; section 4: Prediction of noise generated by hydrodynamic flow (IEC 60534-8-4:1994); German version EN 60534-8-4:1994)
DIN EN 60534-3-1-2000 工業過程控制閥.第3-1部分:尺寸.雙通球型直立式控制法蘭閥門的面對面尺寸和雙通球型角度控制法蘭閥門的中心 (Industrial-process control valves - Part 3-1: Dimensions; Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (IEC 60534-3-1:2000); German version EN 60534-3-1:2000 + Corrigendum 2000)
DIN 3394-3-2004 自動控制閥.第3部分:壓力為4巴及以下的0級減壓安全閥 (Automatic control valves - Part 3: Class 0 pressure relief, valves for pressure up to 4 bar)
DIN EN 60534-3-3-2000 工業過程控制閥.第3-3部分:尺寸.對頭焊接的對頭尺寸,兩種方式,球型,直角型控制閥門 (Industrial-process control valves - Part 3-3: Dimensions - end-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves (IEC 60534-3-3:1998); German version EN 60534-3-3:1998)
DIN EN 60534-2-1-2000 工業過程控制閥.第2-1部分:流動容量.在安裝條件下流體流動的尺寸方程 (Industrial-process control valves - Part 2-1: Flow capacity; sizing equations for fluid flow under installed conditions (IEC 60534-2-1:1998); German version EN 60534-2-1:1998)
DIN EN 1074-5-2001 供水閥門.適用性要求和適配試驗.第5部分:控制閥門 (Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves; German version EN 1074-5:2001)
DIN EN 12334-2001 工業閥門.鑄鐵控制閥門 (Industrial valves - Cast iron check valves; German version EN 12334:2001)
DIN EN 60534-8-3-2001 工業過程控制閥.第8-3部分:噪聲問題.控制閥空氣動力噪聲預測法 (Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method (IEC 60534-8-3:2000); German version EN 60534-8-3:2000)
DIN IEC 60534-5-1984 工業過程控制閥.第5部分:標記 (Industrial-process control valves; part 5: marking)
DIN EN 60534-6-2-2001 工業過程控制閥.第6-2部分:定位器裝到控制閥上的安裝細則.旋轉傳動裝置上安裝的定位器 (Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators (IEC 60534-6-2:2000); German version EN 60534-6-2:2001)
DIN EN 1349-2000 工業過程控制閥門 (Industrial process control valves; German version EN 1349:2000)
DIN EN 60534-8-1-2001 工業過程控制閥.第8部分:噪聲問題.第1節:由通過控制閥的空氣動力流產生的噪聲的實驗室測量 (Industrial-process control valves - Part 8: Noise considerations; Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves (IEC 60534-8-1:1986); German version EN 60534-8-1:2000)
DIN ISO 15407-1-2003 氣壓傳動.五氣口方向控制閥、規格18mm和26mm.第1部分:無電氣接頭的安裝面 (Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 1: Mounting interface surfaces without electrical connector (ISO 15407-1:2000))
DIN ISO 5599-1-1998 氣壓液動.五通方向控制閥.第1部分:不帶電連接件的安裝接口表面 (Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connectors (ISO 5599-1:1989))
DIN EN 60534-3-2-2002 工業過程控制閥.第3-2部分:尺寸.無法蘭控制閥(薄型蝶閥除外)的端面間距尺寸(IEC60534-3-2:2001) (Industrial-process control valves - Part 3-2: Dimensions; Face-to-face dimensions for rotary control valves except butterfly valves (IEC 60534-3-2:2001); German version EN 60534-3-2:2001)
IEC 60534-3-2-2001 工業過程控制閥.第3-2部分:尺寸.蝶形閥除外的轉式控制閥的端面距 (Industrial-process control valves - Part 3-2: Dimensions; Face-to-face dimensions for rotary control valves except butterfly valves)
IEC 60534-2-5-2003 工業過程控制閥.第2-5部分:流通能力.通過有段間恢復能力的多段控制閥門的流體流量的校準公式 (Industrial-process control valves - Part 2-5: Flow capacity; Sizing equations for fluid flow through multistage control valves with interstage recovery)
IEC 60534-5-1982 工業過程控制閥.第5部分:標志 (Industrial-process control valves. Part 5 : Marking)
IEC 60534-2-1-1998 工業過程控制閥.第2-1部分:流量.安裝條件下流體流量的校準公式 (Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions)
IEC 60534-8-4-1994 工業過程控制閥.第8部分:噪聲狀態.第4節.流動產生的噪聲的預報 (Industrial-process control valves - Part 8: Noise considerations - Section 4: Prediction of noise generated by hydrodynamic flow)
JIS B8656-2002 比例電動液壓旁通流量控制閥試驗方法 (Test methods for electro-hydraulic proportional bypass flow control valves)
JIS B8654-2002 比例電動液壓串聯型流量控制閥試驗方法 (Test methods for electro-hydraulic proportional series flow control valves)
JIS B8657-2002 比例電動液壓定向旁通流量控制閥試驗方法 (Test methods for electro-hydraulic proportional directional bypass flow control valves)
JIS B8659-2-2002 液壓傳動.電氣調節液壓控制閥門.第2部分:三路定向流量控制閥門的試驗方法 (Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 2: Test methods for three-way directional flow control valves)
UL 429-1999 電動控制閥 (Electrically operated valves )
UL 753-1995 消防裝置用自動供水控制閥報警附件 (Alarm accessories for automatic water-supply control valves for fire protection service )
UL 1468-1995 防火設備用直接控制的減壓閥和壓力控制閥 (Direct acting pressure reducing and pressure restricting valves )
UL 1739-1994 消防設備用液壓控制的壓力控制閥 (Pilot-operated pressure-control valves for fire-protection service )
JIS B8655-2002 比例電動液壓串聯型定向流量控制閥試驗方法 (Test methods for electro-hydraulic proportional directional series flow control valves)
JIS B8375-3-2000 氣動液壓.五孔定向控制閥.第3部分:閥功能通訊的密碼系統 (Pneumatic fluid power -- Five-port directional control valves -- Part 3: Code system for communication of valve functions)
JIS B8375-1-2000 氣動液壓.五孔定向控制閥.第1部分:無電接頭的安裝界面 (Pneumatic fluid power -- Five-port directional control valves -- Part 1: Mounting interface surface without electrical connector)
JIS B8357-2000 液壓傳動., , , 補償式流量控制閥.裝配面 (Hydraulic fluid power -- Compensated flow-control valves -- Mounting surfaces)
JIS B8400-1-2003 氣壓傳動.尺寸為18mm-26mm的五孔定向控制閥.第1部分:無電連接件的安裝接口表面 (Pneumatic fluid power -- Five-port directional control valves, sizes 18 mm and 26 mm -- Part 1: Mounting interface surfaces without electrical connector)
JIS F3024-1996 造船.控制閥用艙面支座 (Shipbuilding -- Deck stands for controlling valves)
JIS B8658-1989 比例電動液壓控制閥用電力放大器規則 (Rules of electronic amplifier for electro-hydraulic control valves)
JIS B8380-2002 氣壓液動.控制閥門和其他元部件出口和控制機構的鑒定 (Pneumatic fluid power -- Identification of ports and control mechanisms of control valves and other components)
JIS B8376-1994 氣動速度控制閥 (Speed control valves for pneumatic use)
JIS B8387-2000 液壓動力.四孔調節閥門和四孔方向控制閥門.02,03,05尺寸.夾持尺寸 (Hydraulic fluid power -- Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 -- Clamping dimensions)
JIS B8375-2-2000 氣動液壓.五孔定向控制閥.第2部分:帶備用電接頭的安裝界面 (Pneumatic fluid power -- Five-port directional control valves -- Part 2: Mounting interface surface with optional electrical connector)
JIS B8664-2001 液壓動力.壓力控制閥(不包括減壓閥)、順序活門、釋荷閥、節流閥和止回閥.安裝表面 (Hydraulic fluid power -- Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces)
JIS B8659-1-2000 液壓動力.電氣調節液壓控制閥門.第1部分:四路直流控制閥門的試驗方法 (Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 1: Test methods for four-way directional flow control valves)
JIS B2007-1993 工業過程控制閥.檢驗和常規試驗 (INDUSTRIAL-PROCESS CONTROL VALVES - INSPECTION AND ROUTINE TESTING)
ISO 10770-2-1998 液壓傳動.電模式液壓控制閥.第2部分:三向流動控制閥的試驗方法 (Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 2: Test methods for three-way directional flow control valves)
ISO 5599-3-1990 氣壓傳動.五口控制閥.第3部分:閥門功能交換的編碼體系 (Pneumatic fluid power; five-port directional control valves; part 3: code system for communication of valve functions)
ISO 7790-1997 液壓傳動.規格為03和05型的四油口標準設計疊閥和四油口定向控制閥.緊固尺寸 (Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions)
ISO 11727-1999 氣流動力.控制閥和其它元件的控制機械裝置和氣門的識別 (Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components)
ISO 5599-2-2001 氣壓液動.五通方向控制閥.第2部分:任選電氣連接器的安裝接口面 (Pneumatic fluid power - Five-port directional control valves - Part 2: Mounting interface surfaces with optional electrical connector)
ISO 15407-1-2000 18mm和26mm五氣口氣動方向控制閥.第1部分:無插頭安裝界面 (Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 1: Mounting interface surfaces without electrical connector)
ISO 6263-1997 液壓傳動.補償式流量控制閥.裝配面 (Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces)
ISO 4401-1994 液壓傳動.四油口定向控制閥.裝配面 (Hydraulic fluid power - Four-port directional control valves - Mounting surfaces)
ISO 15407-2-2003 氣壓傳動.五氣口方向控制閥,規格18mm和26mm.第2部分:可任選連接器的安裝接口 (Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 2: Mounting interface surfaces with optional electrical connector)
ISO 5599-1-2001 氣壓液動.五通定向控制閥.第1部分:不帶電連接器的安裝接口表面 (Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector)
ISO 12238-2001 氣壓液動.方向控制閥門.轉換時間的測量 (Pneumatic fluid power - Directional control valves - Measurement of shifting time)
ISO 10770-1-1998 液壓傳動.電模式液壓控制閥.第1部分:四向流動控制閥的試驗方法 (Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 1: Test methods for four-way directional flow control valves)
IEC 60534-8-3-2000 工業過程控制閥.第8-3部分:噪聲的考慮.控制閥的氣動噪聲預測法 (Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method)
IEC 60534-8-2-1991 工業過程控制閥.第8部分:噪聲問題.第2節:由通過控制閥的液力流產生的噪聲的實驗室測量 (Industrial-process control valves; part 8: noise considerations; section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves)
IEC 60534-2-3-1997 工業過程控制閥.第2-3部分:流通能力.試驗規程 (Industrial-process control valves - Part 2-3: Flow capacity - Test procedures)
IEC 60534-8-1-1986 工業過程控制閥.第8部分:噪聲的考慮.第1節:流經控制閥的氣動流產生的噪聲的實驗室測量 (Industrial-process control valves. Part 8 : Noise considerations. Section one - Laboratory measurement of noise generated by aerodynamic flow through control walves)
IEC 60534-3-3-1998 工業過程控制閥.第3部分:尺寸.對接焊的兩向閥,球型閥,直接圖形控制閥的首尾相接尺寸 (Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves)
IEC 60534-6-1-1997 工業過程控制閥.第6部分:定位器裝到控制驅動器的安裝細則.第1節:線型致動器上定位器安裝 (Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators)
IEC 60534-3-1-2001 工業過程控制閥.第3-1部分:尺寸.法蘭面對面尺寸,兩路,直型和法蘭中心對面尺寸,兩路,球形,角型控制閥門 (Industrial-process control valves - Part 3-1: Dimensions; Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves)
IEC 60534-6-2-2000 工業過程控制閥.第6-2部分:定位器聯接到控制閥的安裝細則.環行執行機構定位器 (Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves; Positioner mounting on rotary actuators)
IEC 60534-3-1976 工業過程控制閥.第3部分:尺寸.第1節:二通球形控制閥的法蘭端面距 (Industrial-process control valves. Part 3 : Dimensions. Section One: Face-to-face dimensions for flanged, two-way, globe-type control valves.)
IEC 60534-1-1987 工業過程控制閥.第1部分:控制閥術語和一般原理 (Industrial-process control valves. Part 1: Control valve terminology and general considerations.)
IEC 60534-2-4-1989 工業過程控制閥.第2部分:流通能力.第4節:天然流動特性和量程范圍 (Industrial-process control valves; part 2: flow capacity; section four: inherent flow characteristics and rangeability)
IEC 60534-7-1989 工業過程控制閥.第7部分:數據表 (Industrial-process control valves; part 7: control valve data sheet)
IEC 60534-4-1999 工業過程控制閥.第4部分:檢驗和常規試驗 (Industrial-process control valves - Part 4: Inspection and routine testing)
